Want to know the price of the product? Quickly click to register and leave a message to your supplier. 点击注册--免费!
My Account

yita technology company limited

BaiShiZhou, Nan Shan District

Home>Fasteners, connectors>Pin and key>Key programmer for Toyata

Key programmer for Toyata

Key programmer for Toyata

China

0.00

Yes

CONTACT

Product Detail

Product Description

Contact us: yita [A] yitatech [DOT] cnrnrnKey programmer for ToyatarnrnDescription:rnrnThis adapter can be used to read the pin code of the transponder key automatically, and write the pin code into the computer transponder of the suited ECU. It can be used to match the vehicle without keys and need not change any computer when matching.Be suitable for all the Toyota Series from 1997 to 2005. rnrnBe suitable for the wafer keys match of Toyota, such as LEXUS (LS400 ES300 GS300 IS2000 IS300)、Camry 2.0、2.4、JEEP-2007 3400 4500 4700、AVALON、PREVIA. rnrnEquip English using manual. Offer technology support.rnrnFrom the date of purchase, we provide for a 18 month repair warranty with conditions.rn

Product Feature

Use for the following cars:rnrnu2022 ES300(1997-2003)rnu2022 GS300(1997-2003)rnu2022 GS400(1997-2000)rnu2022 GX430(2001-2003)rnu2022 IS300-IS200(2001-2003)rnu2022 LS400(1997-2000)rnu2022 LX470(1998-2002)rnu2022 RX300(1999-2003)rnu2022 SC300(1998-2001)rnu2022 SC400(1998-2001)rnu2022 4Runner(1999-2003)rnu2022 Avalon(1998-2003)rnu2022 Cammry-4cly(1998-2005)rnu2022 HighLander(2001-2003)rnu2022 Lander Cruiser(1998-2003)rnu2022 MR2(2000-2003)rnu2022 RAV4(2000-2003)rnu2022 Sequoia(2000-2003)rnu2022 Sienna(1998-2003)rnu2022 Solara(1999-2003)rnu2022 Previa(1999-2003)rnrn

Product Specification / Models

Operations of key programmer:rnrnDismantle the engine ECU from the vehicle (or IMMO), and take down the IC chip identified as u201c93C56u201d(fixed to the computer in the vehicle engine; for the Camry being IC601, and Lexus being IC900. Identification number for a chip fixed to IMMO is 93LC66). Clean up every pin of IC to make sure of a sound connection.rnrnInstall 93C56 on the device through programmer; make sure that the connection is good.rnrnSupply electricity to the programmer, the screen will showu201c can work normalu201d with a beep sound indicating that the machine is working well.rnrnu2022Press u201cR-keyu201d, and the red light u201cLEDu201d will be lit; programmer is thus ready for programming.rnrnu2022Put the key on the key logo of the programmer.rnrnu2022Press R-key again to hear the beep sound beep 4 times, and the red light also goes off, these means that the key has been successfully programming to the programmer. If the beep sound is not made 4 times, then repeat the operation until you hear the exact 4 beep sound.rnrnu2022By the stated operations you can programming 3 keys to the programmer altogether.rnrnu2022Now you can verify whether the 3 keys have been actually programmed: press R-key, put a key near the key logo, if a 4-beep sound is made, that means the programming is effective. Every key must be verified so that they can be program to 93LC56 and 93LC66.rnrnu2022Press Pr-A, Pr-B and Pr-C orderly to programming the 3 programmed keys to 93C56(or 93LC66). When u201cOKu201d displays, the programming succeeds; otherwise u201cERRORu201d signal appears. Failure may be due to misconnection between 93C56 and the programmer, or the reverse installation or corruption of the chip. In this case you better repeat the adaptation twice to ensure the success.rnrnu2022Now that IC-93C56 (or 93LC66) has three keys programed to it, you can now weld it to the engine ECU. Make sure the weld is goodrn

CONTACT US

To,

vicky
CONTACT

MORE PRODUCTS

*
*
*
*
看不清?换一张
*
*
*
看不清?换一张